Hoover Dishwasher Error Codes – How to Easily Fix Them

If you believe the dishwasher is not working correctly, consult the quick guide provided below with some practical tips on how to fix the most common problems. If malfunctions or faults occur when a programme is running, the indicator light that corresponds to the selected cycle will blink rapidly, and an intermittent audio signal will sound. In this case, turn the dishwasher off by pressing the “ON/OFF” button. After checking to make sure the water supply is open, that the drain pipe is not bent and that the siphon or filters are not clogged, set the selected program again.

Error Messages

Error CodesMeaning and Solutions
E1Water supply switched off. Switch off appliance. Turn on water supply. Reset the cycle.
E2Close the water supply, unscrew the drain pipe from the back of the dishwasher and check that the "sand" filter is not clogged.
E3The dishwasher does not drain water. Make sure the drain pipe isn’t bent, trapped or blocked, and the filter is not clogged. Make sure the siphon is not clogged.
E4Water leak. Make sure the drain pipe isn’t bent, trapped or blocked, and the filter is not clogged. Make sure the siphon is not clogged.
E5NTC fault.
E6Electronic control fault.
E7Electronic control fault.
E8The water heating element is not working correctly or the filter plate is clogged. Clean the filter plate.
E9Turbidity sensor fault.
EfElectronic control fault.
ELElectronic control fault.
EiThe water heating element is not working correctly or the filter plate is clogged. Clean the filter plate.
EhHeater element safety switch short circuited.
EeHeater element safety switch open circuited.
EdCommunication Abnormal. Detect abnormal data over 20s, indicator fleets. Without treatment, it returns to normal after the signal recovery.

Control Panels

Hoover Dishwasher Control Panel
Hoover Dishwasher Control Panel
Hoover Dishwasher Control Panel
Hoover Dishwasher Control Panel

Child Lock

Pressing the EXTRADRY and START DELAY buttons at the same time for about 3 seconds allows you to lock all keys. In this way, you can prevent any unwanted or accidental changes.

The key lock can be cancelled by simply pressing the EXTRADRY and START DELAY buttons again or by switching off the appliance.

Display Description

The display keeps you constantly informed on the operation of the appliance.

Hoover Dishwasher Display Description
Hoover Dishwasher Display Description
  1. Temperature Display: Indicates the washing temperature of each programme selected.
  2. Programme Display: Indicates set wash programmes, provides information on set options, reports any faults and so on.
  3. Time Remaining Display: Indicates the wash time for each selected programme and provides the time remaining to the end of the programme.
  4. Water Supply Closed Indicator Light: Indicates any fault in the inflow of water between the tap and the dishwasher.
  5. “Salt Empty” Indicator Light
  6. “Rinse Aid Empty” Indicator Light
  7. Wi-fi Connection Indicator Light
  8. “Open Door” Option Indicator Light
  9. Programme Indicator Lights
  10. “Total care” Programme Indicator Light When the Total Care programme is enabled, the corresponding indicator light comes on.
  11. “Half Load” Option Indicator Light
  12. “Extradry” Option Indicator Light
  13. “Addish” indicator light

Filtering System

The filter prevents larger remnants of food or other objects from getting inside the pump. The residues may block the filter, in this case they must be removed.

The filter system consists of a coarse filter,a flat (Main filter) And a microfilter (Fine filter).

Hoover Dishwasher Filtering System
Hoover Dishwasher Filtering System

Main filter 1

Food and soil particles trapped in this filter are pulverized by a special jet on the lower spray arm and washed down to drain.

Coarse filter 2

Larger items, such as pieces of bones or glass, that could block the drain are trapped in the coarse filter. To remove the items caught by the filter, gently squeeze the tap on the top of this filter and lift out.

Fine filter 3

This filter holds soil and food residues in the sump area and prevents it from being deposited on the dishes during wash cycle.

Troubleshooting

Hoover Dishwasher Troubleshooting
Hoover Dishwasher Troubleshooting
TroubleCause
No programme works1.Plug not connected to wall socket, Connect electric plug. 2. O/I button not pressed, Press button. 3. Door is open, Close door. 4. No electricity, Check.
Dishwasher does not fill with water1. The water tap is closed, Open the water tap. 2. The water supply hose is bent, Eliminate the bends in the hose. 3. The filter of the water supply hose is clogged, Clean the filter at the end of the hose.
Dishwasher does not discharge water1. Filter is dirty, Clean filter. 2. Drain pipe is bent, Eliminate the bends in the pipe. 3. The drain pipe extension is not correctly connected, Follow the instructions for connecting the drain pipe carefully. 4. The outlet connection on the wall is pointing downwards not upwards.
Dishwasher discharges water continuouslyPosition of the drain pipe is too low. Lift drain pipe to at least 40 cm above floor level.
Spray arms are not heard to rotate1. Excessive amount of detergent. Reduce amount of detergent Use suitable detergent. 2. Item prevents arms from rotating. Check. 3. Filtering plate and filter very dirty. Clean filtering plate and filter.
On electronic appliances without a display: one or more indicator lights flashing quicklyWater supply tap turned off. Switch off the appliance. Turn on the tap. Re-set the cycle.
Dishes only partially washedBottom of saucepans have not been washed well. Burnt on food remains must be soaked before putting pans in dishwasher.
Detergent not dispensed or partially dispensedCutlery, dishes, pans, etc., stop the detergent dispenser from opening. Position dishes so as not to obstruct the dispenser.
Presence of white spots on dishesMains water is too hard. Check salt and rinse aid level and regulate.
Noise during wash1. The dishes knock against one another. Re-check loading of dishes in the basket. 2. The revolving arms knock against the dishes, Re-check loading of dishes in the basket.
The dishes are not completely dry1. Inadequate air flow. Leave the dishwasher door ajar at the end of the wash program to allow the dishes to dry naturally. 2. Rinse aid missing, Fill the rinse aid dispenser.

Manual Pdf

Hoover Dishwasher Manual PDF

Dylan Joseph
Follow us


7 thoughts on “Hoover Dishwasher Error Codes – How to Easily Fix Them”

Leave a Reply to James Turner Cancel reply