Aroma Rice Cooker error codes can vary depending on the specific model and type of oven you have. However, I can provide you with a list of common Aroma Rice Cooker error codes and their meanings. Keep in mind that these codes may not cover all possible error codes for Aroma Cooker, and it’s always best to consult the user manual or contact Aroma customer support for accurate information regarding your specific model.
Here are some common Aroma Rice and Grain Multi Cooker error codes
Most Common Codes
|E1||Bottom sensor open circuit|
|E2||This error indicated that your rice cooker is overheated. Unplug your rice cooker and allow it to cool for 20-30 minutes.|
|E3||Turn off rice cooker. Allow to cool for 2-5 minutes then restart.|
Multicooker Food Steamer Codes
|E0||Dry boil protection or steam generator maintenance warning. Turn off the cooker. Allow it to cool for 5 to 10 minutes then restart. If the display flashes “CL,” the unit needs to be thoroughly cleaned before continuing to use the cooker.|
|E1||Improper glass inner pot or lid placement. Ensure the glass inner pot and lid are properly placed in/on the unit. Once they are correctly placed, the cooking process will resume automatically.|
|E2||Not enough water in the water tank. Ensure the water tank is filled with purified water above the MIN line. Once sufficiently filled, cooking will resume.|
|E3||High voltage protection (135V~155V). Press and hold the cancle button for at least 3 seconds then unplug the power cord. Rectify the electrical power problem, then restart the cooker.|
|E4||Low voltage protection (75V~95V). Press and hold the cancle button for at least 3 seconds and unplug the power cord. Rectify the electrical power problem then restart the cooker.|
|E5||Temperature sensor open circuit error.|
|E6||Temperature sensor short circuit error. Turn off the cooker. Allow it to cool for 5 to 10 minutes then restart.|
|E9||Exceeding “0” limit error.|
Because rice varieties may vary in their make-up, results may differ. Below are some troubleshooting tips to help you achieve the desired consistency.
Rice is too dry/hard after cooking: If your rice is dry or hard/chewy when the rice cooker switches to Keep-Warm, additional water and cooking time will soften the rice. Depending on how dry your rice is, add ½ to 1 cup of water and stir through. Close the lid and press the WHITE RICE button. When rice cooker switches to Keep-Warm, open the lid and stir the rice to check the consistency. Repeat as necessary until rice is soft and moist.
Rice is too moist/soggy after cooking: If your rice is still too moist or soggy when the rice cooker switches to Keep-Warm, use the serving spatula to stir the rice. This will redistribute the bottom (moistest) part of the rice as well as release excess moisture. Close the lid and allow to remain on Keep-Warm for 10-30 minutes as needed, opening the lid and stirring periodically to release excess moisture.
Before First Use
- Read all instructions and important safeguards.
- Remove all packaging materials and check that all items have been received in good condition.
- Tear up all plastic bags and dispose of them properly as they can pose a risk to children.
- Wash accessories in warm, soapy water. Rinse and dry thoroughly.
- Remove the inner pot from the cooker and clean with warm, soapy water. Rinse and dry thoroughly before returning to the cooker.
- Wipe cooker body clean with a damp cloth.
- Remove and empty the condensation collector.
- Soak the inner pot and all accessories or wash on the top rack of the dishwasher.
- Wipe cooker body clean with a damp cloth.
- Thoroughly dry the cooker body and all accessories.
- Reassemble for next use.
What is the error code e0 on the Aroma rice cooker?
The sensor the inner ceramic pot sits on and depresses is bad, not working.
What is the E3 code on the Aroma rice cooker?
The E3 code is a safety feature. It appears when the unit's running temperature is higher than the programmed temperature to prevent any food from burning or the overheating of the unit.
What is the E1 error on the Aroma rice cooker?
If any one of the wires of these sensors got braked you will get the E1 Error.
What is the error code E6 on the Aroma rice cooker?
E6 is overheat. It occurs with some high ferrous cookware. Turn the unit off, let cool for 15 minutes, pull the plug and re-insert it, and try again at a lower temperature setting.
Offical website: aromaco.com
- Sharp Washer and Dryer Error Codes List (Troubleshooting Guide) - December 8, 2023
- Amica Washing Machine Error Codes – Troubleshoot Your Washer - November 26, 2023
- Aeg Oven Error Codes – How to Easily Fix Them - November 20, 2023